-
Manufacturer Good Price Polycarboxylate Superplasticizer Powder (PCE1030)
HIGH RANGE WATER REDUCER(PCE1030) is a water -soluble anion high -polymer electrical medium. PCE1030 has a strong adsorption and decentralized effect on cement. PCE1030 is one of the well -schizes in the existing concrete water reducing agent. The main features are: white, high water reducing rate, non -air induction type, low chloride ion content is not rusted on steel bars, and good adaptability to various cement. After using the water reducing agent, the early intensity and permeability of the concrete increased significantly, the construction properties and water retention were better, and the steam maintenance was adapted.
-
Manufacturer Good Price Water soluble semi-inorganic silicon steel sheet paint
Compared with the traditional silicon steel sheet paint, 0151 paint uses tap water as solvent, does not contain chromium, phenolic resin and other environmentally unfriendly components, is a new green product; The inorganic content of 0151 paint is up to 50%, which meets FranKlin burn test.
-
Manufacturer Good Price Sodium Sesqui Carbonate CAS：533-96-0
Sodium Sesqui Carbonate, alias, is sodium of sodium carbonate, semi -alkali，and the molecular formula is NA2CO3 · NAHCO3 · 2H2O. Bicarbonate sodium is a chemical of white needle -shaped crystals, sheet -like or crystalline powder. The relative molecular mass is 226.03, and the relative density is 2.112. At 100 ° C, it is 42%. The aqueous solution is alkaline, and its alkali is weaker than sodium carbonate. It is made by a certain proportion of sodium carbonate and sodium bicarbonate solution.
Characteristics:Sodium Sesqui Carbonate is a white needle-shaped crystal, sheet -like or crystalline powder. The relative density is 2.112, which is not easy to weather. At 42%at ° C, the aqueous solution is alkaline, and sodium bicarbonate is weaker than sodium carbonate.
Synonyms：Carbonicacid,sodiumsalt(2:3);magadisoda;snowflakecrystals;sq810;Sodium Sesquicarbonat;trisodiumhydrogendicarbonate;urao;SODIUM CARBONATE, SESQUIOXIDE DIHYDRATE
CAS: 533-96-0
EC No.: 205-580-9
-
Manufacturer Good Price HIGH RANGE WATER REDUCER(SMF)
HIGH RANGE WATER REDUCER(SMF) is a water -soluble anion high -polymer electrical medium. SMF has a strong adsorption and decentralized effect on cement. SMF is one of the well -schizes in the existing concrete water reducing agent. The main features are: white, high water reducing rate, non -air induction type, low chloride ion content is not rusted on steel bars, and good adaptability to various cement. After using the water reducing agent, the early intensity and permeability of the concrete increased significantly, the construction properties and water retention were better, and the steam maintenance was adapted.
-
Manufacturer Good Price CW40-716 CAS:24937-78-8
CW40-716 Lotion is a high-viscosity adhesive.CW40-716 has the characteristics of fast initial adhesion, strong adhesion, good mechanical stability, high resistance to Zhang strength and creep resistance. Therefore, the CW40-716 lotion is widely used, and CW40-716 is also suitable for some special adhesives, such as UV-optical curing surfaces with cardboard bonding, PVC film and wooden boards.
Architecture: CW40-716 Lotion is compatible with various polymers, solvents, plasticizers and other additives. When used in the woodworking industry, it can be mixed with polytharine or isophyl acid ester to make the product great water resistance. In addition, CW40-716 Lotion has a large response to the viscosity of plasticizers or solvents.
CAS: 24937-78-8
-
Manufacturer Good Price 2,2,4-Trimethyl-1,3-pentanediolmono(2-methylpropanoate) （DN12） CAS:25265-77-4
2,2,4-Trimethyl-1,3-pentanediolmono(2-methylpropanoate) is a volatile organic compound (VOC) being useful in paints and printing inks. As coalescent for latex paints, DN-12 finds applications in various fields including coatings, nail care, Printing inks, Solvents for cosmetics and personal care, plasticizers.DN-12 is also utilized as a coalescing agent to reduce the minimal film forming temperature (MFFT) during latex film preparation. Study using coupled capillary gas chromatography-mass spectrometry (HRGC-MS) has confirmed its detection in polypropylene packed food samples1. DN-12 is also employed in pharma industry. DN-12 may be further used in the prepare carbon nanotube (CNT) paste employed in field emission displays (FED).
2,2,4-Trimethyl-1,3-pentanediol monoisobutyrate (TMPD-MIB, texanol), a volatile organic compound (VOC), is an important component found in paints and printing inks. It is utilized as a coalescing agent to reduce the minimal film forming temperature (MFFT) during latex film preparation. Its detection in polypropylene packed food samples has been reported by coupled capillary gas chromatography-mass spectrometry (HRGC-MS). The performance of various dispersant affecting the dispersion of multi-walled carbon nanotube (MWCNT) in texanol has been studied.
CAS: 25265-77-4
-
Manufacturer Good Price 1,2-propylene glycol CAS:57-55-6
Propylene glycol is used as antifreeze in breweries and diaries, in the manufacture of resins, as a solvent, and as an emulsifier in food. Propylene glycol was present as an occupational sensitizer in the color-film developer Flexicolor.
CAS: 57-55-6
-
Manufacturer Good Price VAE EMULSION(VAE) CAS:24937-78-8
VAE EMULSION(VAE) is obtained by gathering ethylene and ethyl acetate according to different proportions. EVA’s English abbreviation represents ethylene composition, VA represents acetate ethylene components. The content is closely related. According to the different VA content, VAE EMULSION(VAE) can be divided into three categories: the VA content is 5%Chemicalbook-40%called EVA plastic, which is mainly used for polyethylene modification, manufacturing wires and cables, thin films, and other molding products and mixture; The VA content is 40%-90%called EVA rubber, which is mainly used for rubber, cables and automotive industrial components. The VA content is higher than 90%, which is called polyache acetate emulsion lotion, and is mainly used for adhesives, coatings, etc.
CAS: 24937-78-8
-
Manufacturer Good Price Aluminosilicate Cenosphere CAS:66402-68-4
Physical performance:
Fly ash is a solid waste discharged from coal-fired power plants. Aluminosilicate Cenosphere is hollow beads extracted from fly ash, accounting for about 1% ~ 3% of the total amount of fly ash.
Characteristics:
The mass loss of floating beads in strong acid-base solutions such as 10% hydrochloric acid, sulfuric acid, nitric acid and potassium hydroxide for 24 hours is 1.07% ~ 2.15%, and 11.58% in 1% hydrofluoric acid. Therefore, floating beads have strong corrosion resistance to general strong acids and bases, so they can be used in special projects with high requirements for acid-base resistance (except hydrofluoric acid)..CAS: 66402-68-4
-
Manufacturer Good Price Melamine CAS:108-78-1
Melamine-formaldehyde resin (MFR) is an active ingredient of strong (reinforced) plasters. Sensitization was reported in a plaster-room technician, who applied resin-reinforced pIaster casts, and in dental technicians. Melamine was contained in a strong dental pIaster used for mouldings. Used as a textile finish res in, Melamine was also found to be an allergen in a women who replaced clothes in a store. Melamine also releases formaldehyde, which may be the sensitizer.
CAS：108-78-1
