-
HB-421
Appreance: yellow to brown transparent liquid
Active ingredients: 95% min
Specific gravity(20℃): 1.0-1.05
PH: 9
-
Isopropyl Ethyl Thionocarbamate CAS: 141-98-0
Appreance: Amber to dun liquid
Purity: 95% Min
Specific gravity(20℃）：0.968-1.04
Isopropyl alcohol: 2.0 Max
Thiourea: 0.5 Max
-
Sodium Diisobutyl (Dibutyl) Dithiophosphate
Molecular forula:((CH₃)₂CHCH₂O)₂PSSNa[(CH₃(CH₂)₃0)₂PSSNa]
-
Ammonium Dibutyl Dithiphosphate
Molecular formula: (C4H9O) 2PSS · NH4
-
Sodium Ethyl Xanthate
Application:Sodium Ethyl Xanthate is the shortest carbon chain of the available xanthates,which is widely used asflotation reagent and improve the grade and recovery.This mining flotation reagent is a low-cost but a high selective collector of available.xanthates,and it i smost useful in the flotation of sulphide ore and multi-metallic ore for maximum selectivity.Feeding method:10-20% solutionUsual dosage:10-100g/tonStorage&Handling:Storage:Store solid xanthates in original properly sealed containers under cool dry conditions awayfrom sources of ignition.Handling:Wear protective equipment.Keep away from sources of ignition.Use non sparking tools. Equipment should be earthed to avoid static discharge.All electronice quipment should be adjusted for work in explosive environment. -
Sodium Isopropyl Xanthate
Application:Sodium Isopropyl Xanthate is widely used as flotation reagents in the mining industry for multi-metal sulphide ore for good compromise between collecting power and selectivity.It can float all sulfides but is not recommended for scavenging or high grade sulfides because of the larger retention time required to get desired recovery levels.It is most commonly used in zinc flotation circuits because it is selective against iron sulfides at high pH (10 Min) while aggressively collecting the copper-activated zinc.Ithas also been used to float pyrite and pyrrhotite if the iron sulfide grade is fairly low and the pH is low. It is recommended for copper-zinc ores,lead-zinc ores, copper-lead-zinc ores, low grade copper ores, and low grade refractory gold ores,but not recommended for oxidized or tarnished ores due to its lack of pulling power. It is alsoused as vulcanization accelerator for rubber industry as well.Feeding method: 10-20% solutionUsual dosage: 10-100g/tonStorage&Handling:Storage:Store solid xanthates in original properly sealed containers under cool dry conditions away from sources of ignition.Handling:Wear protective equipment. Keep away from sources of ignition. Use non sparking tools. Equipment should be earthed to avoid static discharge. All electronicequipment should be adjusted for work in explosive environment.
